SAWTEQ A-500 | A-510 Winkelanlage · woodindustry.market

Overview

The SAWTEQ A-500 | A-510 is a fully automated angular panel dividing saw engineered for high-volume production environments requiring simultaneous rip and crosscut operations. This dual-axis system combines a programmable rip saw with infinitely adjustable cutting lengths (3,200–5,600 mm) and a cross-cut unit (2,200–2,700 mm) to process sheet materials with minimal manual intervention and maximum throughput. The machine delivers cutting performance through SORB TECH vibration-dampening construction combined with industrial-grade drive systems: the main saw motor reaches 30–47 kW (50 Hz) or 35–54 kW (60 Hz), while the rip and crosscut fence systems operate at speeds up to 90 m/min and 130 m/min respectively. The saw carriage itself accelerates to 130 m/min standard (150 m/min optional), ensuring rapid positioning between cuts. Saw blade projection ranges from 150 mm to 170 mm, accommodating materials of varying thickness while maintaining precision control. This machine targets large-scale woodworking operations—flooring producers, panel manufacturers, cabinet and furniture makers processing veneer or solid wood panels at multi-shift production volumes. It is purpose-built for environments where continuous uptime, consistent edge quality, and high linear output justify the enterprise-level investment. The CADmatic 5 software and 24" full-HD multi-touch interface enable intuitive nesting, gang-cutting strategies, and real-time production monitoring across batches of hundreds of cuts per shift. Within its class, the A-500 | A-510 distinguishes itself through dual-axis modularity—operators can configure rip and crosscut sequences independently to match material flow and part geometries, unlike single-axis saws. The optional 170 mm blade projection and 150 m/min carriage speed push performance at the upper end of mid-scale industrial segment, competing directly with retrofitted legacy equipment while offering modern control architecture and lower maintenance overhead.

Applications

flooring production

Industrial

Flooring manufacturers use the A-500 | A-510 to gang-cut long strips of solid wood or engineered panels into finished plank widths and lengths at high speed. With rip fence speeds to 90 m/min and crosscut capability to 130 m/min, producers can process hundreds of linear meters per shift while the dual-axis system minimizes part handling between operations, reducing labor and defect rates on high-volume runs of 2–5 mm strip widths.

timber construction elements

Industrial

Producers of engineered timber products—CLT panels, glulam beam blanks, and construction-grade plywood—rely on the A-500 | A-510 to achieve tight cross-cut tolerances and high throughput on thick materials. The optional 170 mm blade projection and up to 47 kW motor capacity handle dense engineered wood without performance degradation, critical for maintaining dimensional accuracy across multi-shift production of structural elements.

custom furniture batch production

Medium workshop

Mid-sized custom furniture makers use the A-510 variant to process veneer-faced panels and solid wood blanks for multi-part orders (e.g., 20–50 piece dining sets or modular case goods). The programmable fence system and CADmatic 5 allow quick job changeover between customer specifications without manual setup, while carriage speeds to 130 m/min keep batch lead times competitive against smaller single-blade operations.

cabinet and panel nesting

Industrial

Cabinet manufacturers and panel converters leverage CADmatic 5 nesting to optimize material yield from sheet stock. The configurable cutting lengths (up to 5,600 mm rip) and dual crosscut widths (2,200–2,700 mm) allow simultaneous processing of multiple cabinet part lists in a single job, while the 24" display enables real-time gang-cut sequencing and scrap minimization without tool changes.

Specifications

Processing

Saw Blade Projection150 (170 as option) mm

Program Fence Speed - Rip Sawup to 90 m/min

Program Fence Speed - Cross Cut Sawup to 130 m/min

Saw Carriage Speedup to 130 (150 as option) m/min

Working Areas

Cutting Length - Rip Saw3,200 / 4,300 / 5,600 mm

Cutting Length - Cross Cut Saw2,200 / 2,700 mm

Drive

Main Saw Motor - 50 Hz30 (47 as option) kW

Main Saw Motor - 60 Hz35 (54 as option) kW